Research and production Centre ANOD
Svoboda street, 63,
Nizhny Novgorod, Russia,
+7 (831) 233-77-03, 273-01-78
info@anod.ru
PRODUCTION

Vertical semi-submersible pumps (for water, petroleum products, chemical)

To order

Vertical semi-submersible pumps 8-ANGK

APPLICATION

8- ANGK Vertical Semi-Submersible Pump Units are used for transferring both liquids, pure/moderately contaminated with mechanical impurities/chemically active and neutral, and flammable materials with a density of 600…1,900 kg/m3, a viscosity of 75 cSt max., (parameters of the pumpable product may differ from those above mentioned upon agreement with the Manufacturer) in a temperature range of minus 40 °С to plus 100 °С, from tanks, vessels, etc. under gas explosion hazardous environment.

These Pump Units are widely used in chemical, petrochemical, food, pharmaceutical, processing and electric power, water industries, etc.

SPECIFIC FEATURES

  • Pumps have high efficiency.
  • All Pump Units should be hydraulically and parametrically tested without fail.
  • Impeller diameters should be customer tailored taking into consideration the parameters requested.
  • Material designs should vary depending on corrosiveness of the product pumpable.
  • Depending on hazard of the product pumpable, Pump Units should be equipped with Mechanical Seals of various types manufactured by ANOD S&PC.
  • Pump wet ends are manufactured in the Czech Republic.
  • Pumps are equipped with block inspection sensor.
  • Russian or foreign electromotors. 

TECHNICAL PARAMETERS 

Speed, rpm 1500, 3000
Flow, m3/h 2…960
Head, m 2,5…125
Power, kW up to 1000
Casing pressure, PN, kg/cm2 16
Temperature, °C (up to) 100
Service life, h (no less than) 40 000
Life cycle, y (no less than) 20